- typhuochungnam@gmail.com
- 0979 677 694
Product
Specialized Ink Solutions for Multiple Material Types
Ty Phuoc Hung Nam supplies specialized ink lines with high adhesion, excellent coverage, and stable color. Products are suitable for printing on various materials such as plastics, glass, metal, leather, and fabrics, meeting diverse needs in the packaging, cosmetics, fashion, and industrial manufacturing sectors.
| No. | Product Code | Gloss Level | Printing Surface / Material | Product Characteristics | Drying Method | Thinner / Solvent | Adhesion Promoter | Mixing Ratio |
|---|---|---|---|---|---|---|---|---|
| 1 | SW | High | Waterproof nylon fabric; Oxford fabric; handbags; luggage; ribbons | Good adhesion on multiple surfaces. Abrasion and washing resistant. Bright colors, high coverage. Fast drying | Air dry or heat cure at 180°C x 2 min | 783, Ông già | B11; B5 | 1:1:0.1 (Ink:Oil:Adhesion Promoter) |
| 2 | PPEX | High | PP, PE, PEHD, LD, HD materials and other plastics with varying rigidity and flexibility | High adhesion. Stable color, resistant to fading from light and time | Air dry or heat cure at 80°C x 10 min | 783, Ông già | B11; B5 | 1:1:0.1 (Ink:Oil:Adhesion Promoter) |
| 3 | SA-PVC | High | PVC materials: cooking oil bottles, toys, etc.; shoes and footwear products | High coverage, vivid and even color. Good adhesion on soft plastic. Flexible ink, no cracking when bent. Scratch resistant | Air dry or heat cure at 180°C x 2 min | 783, Ông già | B11; B5 | 1:1:0.1 (Ink:Oil:Adhesion Promoter) |
| 4 | PET-60 | High | Water transfer paper & heat transfer PET film | Good adhesion after heat pressing. Bright colors, high coverage. Abrasion resistant. Color-fast. Fine detail printing | Heat dry at 120°C x 3 min | 783, Ông già | B11; B5 | 1:1:0.1 (Ink:Oil:Adhesion Promoter) |
| 5 | PP INK | High | PP bottles, cups, waste bins, rubber tubes and PP stationery | Good adhesion to PP material. Flexible ink film, no cracking when bent. Fast drying. Resistant to abrasion and mild chemicals | Air dry or heat cure at 180°C x 2 min | 783, Ông già | B11; B5 | 1:1:0.1 (Ink:Oil:Adhesion Promoter) |
| 6 | SSPU | High | Printing on PU leather, genuine leather, PVC leather, travel bags, nylon fabrics of all types | High coverage, vivid and even color. Good adhesion on synthetic materials. Flexible ink, no cracking when bent | Air dry or heat cure at 180°C x 2 min | 783, Ông già | B11; B5 | 1:1:0.1 (Ink:Oil:Adhesion Promoter) |
| 7 | PET-8000 | Medium | Printing on PET: mineral water bottles, soft drink bottles, beer bottles, packaging, PET film | Good adhesion. Flexible ink. Excellent resistance to alcohol, oil, scratch, and chemicals | Air dry or heat cure at 180°C x 2 min | 783, Ông già | B11; B5 | 1:1:0.1 (Ink:Oil:Adhesion Promoter) |
| 8 | 7600-INK | High | Printing on clear glass, frosted glass, glassware, acrylic, HDPE, Melamine metal, PET cups, etc. | No cracking; Smooth and thick layer, strong 3D feel; Good adhesion, good water resistance, good alcohol resistance, good resistance to bleaching | Air dry or heat cure at 120°C x 10 min | 783, Ông già | ET 100 | 1:1:0.1 (Ink:Oil:Adhesion Promoter) |
| 9 | HSA-8000 | High | Printing on ABS, AS, PS | Scratch resistant after drying and curing. Stable, sharp color, no fading. Moderate flexibility | Air dry or heat cure at 80°C x 10 min | 783, Ông già | B11; B5 | 1:1:0.1 (Ink:Oil:Adhesion Promoter) |
| 10 | UV-BL-100 | High | Printing on flat glass or glass bottles | UV-based, no solvent required for drying. Glossy, hard ink surface, light scratch resistance. High adhesion | UV cure | Chất pha loãng UV-SG | 1:1:0.1 (Ink:Oil:Adhesion Promoter) | |
| 11 | UV-9300 | High | Printing on cosmetic packaging made of ABS, AS, PS, PC | Good adhesion. Excellent resistance to alcohol, oil, scratch, and chemicals | UV cure | Chất pha loãng UV-SG | 1:1:0.1 (Ink:Oil:Adhesion Promoter) | |
| 12 | HF-HWC | Medium | Printing on hard PC, 3H hard acrylic, rigid PET, metals, UV-coated boards, etc. | Adhesion on metal and UV-coated materials without complex surface treatment. Stable, sharp color | Heat dry at 70°C x 60 min | B11 | 1:1:0.1 (Ink:Oil:Adhesion Promoter) | |
| 13 | UV-JE-2 | High | Printing on aluminum, stainless steel, or chrome-plated surfaces | Bám dính cực tốt, chịu được mài mòn. Độ bền màu cao. Khô nhanh bằng công nghệ UV giúp tăng năng suất | UV cure | Chất pha loãng UV-SR | D313: 5% | 1:1:0.1 (Ink:Oil:Adhesion Promoter) |
| 14 | HAC-S | High | Hard acrylic and PC up to 3H hardness, PVC sheets, PC, ABS, UV-coated panels, etc. | Good adhesion. Excellent resistance to alcohol, oil, scratch, and chemicals | Air dry or heat cure at 60–80°C x 10 min | 783, Ông già | B11; B5 | 1:1:0.1 (Ink:Oil:Adhesion Promoter) |
| 15 | VIC | Medium | Printing on PVC decals; can also be used on PET/PC film | Excellent weather resistance. Guaranteed color-fast for 5–8 years. Good resistance to oil paint, varnish, and enamel overcoats | Air dry or heat cure at 60–80°C x 10 min | 783, Ông già | B11; B5 | 1:1:0.1 (Ink:Oil:Adhesion Promoter) |
| 16 | PP | High | PPE is a solvent-based gravure ink; for printing on the outer surface of PE, PP, HDPE films | High adhesion on treated plastic films. Bright colors. Good abrasion and water resistance | Air dry or heat cure at 70°C x 2 min | Toluen, IPA, 783, MEK, EA | FO 665; FO 800 | 1:1:0.1 (Ink:Oil:Adhesion Promoter) |
| 17 | PPET | High | PP plastic, industrial plastic packaging | Ink has slight elasticity. Resistant to friction, light, and some chemicals, suitable for packaging products | Air dry or heat cure at 80°C x 10 min | 783, Ông già | FO 665; FO 800 | 1:1:0.1 (Ink:Oil:Adhesion Promoter) |
| 18 | SS | High | Printing on PVC, faux leather (simili), simili footwear, wood, paper | High adhesion. Sharp and vivid image. Anti-blocking, prevents ink sticking or clumping | Air dry via solvent evaporation | Toluen, IPA, 783, MEK, EA | FO 665; FO 800 | 1:1:0.1 (Ink:Oil:Adhesion Promoter) |
| 19 | SB | Medium | Printing on PVC plastic, matte finish | Creates a matte coating, non-reflective, suitable for matte or anti-glare effect products. Good adhesion | Air dry or heat cure at 70°C x 2 min | Toluen, IPA, 783, MEK, EA | FO 665; FO 800 | 1:1:0.1 (Ink:Oil:Adhesion Promoter) |
| 20 | RP | High | Printing on EVA foam materials: footwear. Rubber products | Good flexibility and elasticity, capable of stretching 3–5 times. Ensures strong ink adhesion to material surface | Air dry or heat cure at 160°C x 2 min | EA, Xylene, IPA, Butyl Acetate | FO 665; FO 800 | 1:1:0.1 (Ink:Oil:Adhesion Promoter) |
| 21 | PU | High | PU fabric, synthetic or genuine leather, soft PVC, TPU, woven and non-woven fabrics | Durable in harsh conditions. Resistant to friction and chemicals, suitable for outdoor products | Air dry or heat cure at 160°C x 2 min | Toluen, IPA, 783, MEK, EA | FO 665; FO 800 | 1:1:0.1 (Ink:Oil:Adhesion Promoter) |
| 22 | SSMP | Medium | Printing on soft PVC, nylon, paper and board | Good adhesion. High durability. Slight elasticity. Free from harmful substances | Air dry or heat cure at 180°C x 2 min | Toluen, IPA, 783, MEK, EA | FO 665; FO 800 | 1:1:0.1 (Ink:Oil:Adhesion Promoter) |
| 23 | PLASTISOL | High | Printing on fabrics such as: denim, 100% cotton, spandex, CVC cotton fabric | Good ink adhesion on fabric surface. Print withstands repeated washing. Easy to use. Creates special effects like puff printing, glitter printing, etc. | Air dry or heat cure at 80°C x 10 min | Toluen, IPA, 783, MEK, EA | FO 665; FO 800 | 1:1:0.1 (Ink:Oil:Adhesion Promoter) |
*Formulations are for reference purposes only and do not replace technical testing procedures.
| No. | Product Code | Printing Surface / Material | Product Characteristics | Usage Notes | Drying Method | Light-Colored Fabric (Mixing Ratio) | Dark-Colored Fabric (Mixing Ratio) |
|---|---|---|---|---|---|---|---|
| 1 | Bóng Jean Dẻo Jean | 1. Cotton, 100% cotton fabric 2. Polyester or blended fabric 3. Denim fabric 4. 2-way, 4-way stretch fabric | 1. High gloss – creates sharp light effect 2. Good flexibility – no cracking or breaking when stretched 3. High fabric adhesion, no peeling 4. Easy to mix and pull – manual and industrial screen printing | 1. Stir well before use 2. Test on fabric sample first 3. Do not print on water-resistant coated fabric 4. Avoid prolonged sun exposure | Air dry or heat cure at 100–200°C x 2 min | 1. Gloss Jean: 70% 2. Stretch Jean: 30% 3. Adhesion Promoter: 5% 4. Color Pigment: 0.3–5% | 1. Gloss Jean: 40% 2. Stretch Jean: 60% 3. Adhesion Promoter: 5% 4. Color Pigment: 0.3–5% 5. Puff Additive: 1% |
| 2 | Bóng PVC Dẻo PVC | 1. Sportswear, cold-feel fabric 2. High-stretch fabric 3. Synthetic fiber (Spandex) 4. 2-way, 4-way stretch fabric | 1. High flexibility, good stretch, no cracking 2. Adheres firmly to fabric, no peeling 3. Smooth surface, moderate gloss 4. Suitable for large area printing | 1. Do not expose gloss medium to air for too long 2. Use 55T–57T mesh for best results 3. Avoid printing too thick to maintain stretch 4. Do not print on water-resistant coated fabric | Air dry or heat cure at 100–200°C x 2 min | 1. Gloss Jean: 70% 2. Stretch Jean: 30% 3. Adhesion Promoter: 5% 4. Color Pigment: 0.3–5% | 1. Gloss Jean: 40% 2. Stretch Jean: 60% 3. Adhesion Promoter: 5% 4. Color Pigment: 0.3–5% 5. Puff Additive: 1% |
| 3 | Bóng 58-67 Dẻo 11-20 | 1. Polyester, cotton fabric 2. Khaki, kate, thin canvas 3. Light-colored fabric without surface coating | 1. Medium gloss, good fabric adhesion, smooth and thick print layer 2. Moderate flexibility, withstands regular machine washing 3. Flexible color mixing 4. Prints fine details and large areas without bleeding | 1. Mix at correct ratio, stir well before printing 2. Apply in 2–3 thin layers to improve adhesion 3. Heat press after printing to set color 4. Do not use overly fine mesh as it will block the binder | Air dry or heat cure at 100–110°C x 2 min | 1. Gloss: 70% 2. Stretch: 30% 3. Adhesion Promoter: 1% 4. Color Pigment: 0.3–5% | 1. Gloss: 65% 2. Stretch: 35% 3. Adhesion Promoter: 1% 4. Color Pigment: 0.3–5% |
| 4 | Bóng ST 65 Dẻo SW 66 | 1. 100% cotton knit fabric 2. Nylon, khaki, canvas 3. Thick polyester, cold-feel fabric 4. Dark-colored fabric, light rough fabric | 1. Thick, glossy and sharp print layer, makes images stand out 2. Excellent adhesion, anti-peeling, scratch resistant 3. Prints large areas without cracking after drying 4. Flexible, good elasticity, no breaking when pulled | 1. Stir mixture well before use 2. Do not print too thick in one pass 3. Use 43T mesh for optimal adhesion 4. Heat press after printing to set color | Air dry or heat cure at 110–120°C x 2 min | 1. Gloss ST 65: 70% 2. Stretch SW 66: 30% 3. Adhesion Promoter: 1% 4. Color Pigment: 0.3–5% | 1. Gloss ST 65: 65% 2. Stretch SW 66: 35% 3. Adhesion Promoter: 1% 4. Color Pigment: 0.3–5% |
| 5 | Bóng ST 101 Dẻo SW 102 | 1. Polyester, cold-feel fabric 2. Cotton blend knit 3. Khaki, nylon fabric 4. Medium to thick fabric | 1. High gloss, thick and sharp print layer 2. Good flexibility, no peeling, no breaking 3. Easy to mix with pigment for special effects 4. Strong fabric adhesion, suitable for large prints | 1. Stir binder thoroughly for uniformity 2. Use 43T–55T mesh for even and smooth print layer 3. Do not use on highly elastic fabric 4. Heat press after printing to set the layer | Air dry or heat cure at 100–120°C x 2 min | 1. Gloss ST 101: 70% 2. Stretch SW 102: 30% 3. Adhesion Promoter: 1% 4. Color Pigment: 0.3–5% | 1. Gloss ST 101: 65% 2. Stretch SW 102: 35% 3. Adhesion Promoter: 1% 4. Color Pigment: 0.3–5% 5. Puff Additive: 1% |
| 6 | Bóng Nhạt Dẻo Nhạt | 1. 100% cotton, cold-feel fabric 2. Polyester, TC, spandex 3. Fabric with smooth or medium surface | 1. Smooth, soft print surface, non-tacky when dry 2. High flexibility, good stretch, no cracking 3. Low odor, user-friendly 4. Easy to blend with pigment, vivid and stable colors | 1. Stir binder well, prevent pigment settling 2. Use 55T–77T mesh for thin, smooth layer 3. Avoid printing on water-resistant coated fabric 4. Do not expose binder to sunlight for too long | Air dry or heat cure at 90–100°C x 1.5 min | 1. Soft Gloss: 70% 2. Soft Stretch: 30% 3. Adhesion Promoter: 1% 4. Color Pigment: 0.3–5% | 1. Soft Gloss: 65% 2. Soft Stretch: 35% 3. Adhesion Promoter: 1% 4. Color Pigment: 0.3–5% 5. Puff Additive: 1% |
| 7 | Bóng 44-53 Dẻo 1-10 | 1. 100% cotton, polyester fabric 2. Cold-feel, TC, kate fabric 3. Light or neutral-colored fabric without water-resistant coating. Thin rough fabric | 1. Smooth print layer, medium gloss, even color 2. Good adhesion, not fabric-selective, easy screen cleaning 3. Fast drying 4. Good pigment blending, stable color output | 1. Stir binder before and during printing 2. Use 43T mesh for best print results 3. Limit use on dark-colored fabric 4. Fully dry after printing | Air dry or heat cure at 100–110°C x 1.5 min | 1. Gloss 44-53: 70% 2. Stretch 1-10: 30% 3. Adhesion Promoter: 1% 4. Color Pigment: 0.3–5% | 1. Gloss 44-53: 65% 2. Stretch 1-10: 35% 3. Adhesion Promoter: 1% 4. Color Pigment: 0.3–5% 5. Puff Additive: 1% |
| 8 | Bóng ST 55 Dẻo GW 07 | 1. 4-way stretch, spandex fabric 2. Cold-feel, polyester fabric 3. Sportswear, stretch polyester | 1. Super flexible, good adhesion on stretch fabric, no breaking 2. Smooth print layer, light gloss and high elasticity 3. Excellent fine detail printing, no edge bleeding 4. Accurate color output, pigment distributes evenly in binder | 1. Stir binder and do a test print first 2. Use 55T or 57T mesh for thin and firmly adhered layer 3. Do not print first layer too thick 4. Fully dry after printing | Air dry or heat cure at 100–110°C x 2 min | 1. Gloss ST 55: 70% 2. Stretch GW 07: 30% 3. Adhesion Promoter: 1% 4. Color Pigment: 0.3–5% | 1. Gloss ST 55: 65% 2. Stretch GW 07: 35% 3. Adhesion Promoter: 1% 4. Color Pigment: 0.3–5% 5. Puff Additive: 1% |
| 9 | Bóng Nhung Dẻo Nhung | 1. 100% cotton, fleece 2. Cold-feel cotton, thick knit 3. Rough fabric or lightly textured fabric | 1. Matte surface, feels like real velvet when dry 2. Moderately thick layer, no running, no gloss 3. Can overprint multiple layers for raised effect 4. Strong fabric adhesion, no peeling when washed | 1. Stir binder well to prevent velvet powder settling 2. Use 43T or 55T mesh depending on desired smoothness 3. Do not add gloss agent as it will destroy the matte velvet effect 4. Avoid printing on highly elastic fabric | Air dry or heat cure at 90–100°C x 2 min | 1. Gloss Velvet: 70% 2. Stretch Velvet: 30% 3. Adhesion Promoter: 1% 4. Color Pigment: 0.3–5% | 1. Gloss Velvet: 65% 2. Stretch Velvet: 35% 3. Adhesion Promoter: 1% 4. Color Pigment: 0.3–5% |
*Formulations are for reference purposes only and do not replace technical testing procedures.
| No. | Product Code | Printing Surface / Product Characteristics |
|---|---|---|
| 1 | 7600-INK | 7600-INK prints on clear glass, frosted glass, glassware, acrylic (mica), HDPE, Melamine metal surfaces, and PET cups. |
| 2 | GK | Prints on glass and metal surfaces (household electrical appliances, interior decorative materials, electronic weighing scales, hot pot tables, etc.). |
| No. | Product Code | Printing Surface / Product Characteristics |
|---|---|---|
| 1 | 7600-INK | 7600-INK prints on clear glass, frosted glass, glassware, acrylic (mica), HDPE, Melamine metal surfaces, and PET cups. |
| 2 | UV-BL-100 | UV-BL-100 INK is suitable for printing on flat glass or glass bottles. |
| No. | Product Code | Printing Surface / Product Characteristics |
|---|---|---|
| 1 | AN TÀI 1992 | High coverage, even and sharp print color, no smearing at high print speeds. Fast drying, no ink sticking to the roller and no back-staining when stacking products. |
| 2 | TÂN BÌNH | Vivid color, even coverage, sharp image output, suitable for bold designs or fine-detail printing. Fast drying, no smearing, ensures high efficiency on medium-to-high speed printing machines. |
| 3 | IPI | Printing on soft PVC, nylon, paper and laminated board. Durable colors, no fading under light or mild heat, meeting high technical requirements for plastic-paper composite packaging printing. |
| No. | Product Code | Color | Hardness | Solvent-Based | UV | Plastisol | Water-Based | CTS | Decoating Agent | Hard Water Resistance |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Standard Blue Emulsion | Blue | ✓ | Caustic Soda, Chlorine | Regular Vinegar; SM 404; One Pot | |||||
| 2 | Oil-Based Green Emulsion | Green | ✓✓✓ | Caustic Soda, Chlorine | Regular Vinegar; SM 404; One Pot | |||||
| 3 | Paper Green Emulsion | Green | ✓✓✓ | ✓✓ | Caustic Soda, Chlorine | Regular Vinegar; SM 404; One Pot | ||||
| 4 | DC 1 | Blue | ||||||||
| 5 | DC 2 | Blue | ||||||||
| 6 | CP 1 | Blue | ✓ | USA Decoater | One Pot; AB Emulsion | |||||
| 7 | CP 2 | Blue | 0.22 | ✓✓✓ | ✓ | ✓✓ | USA Decoater | One Pot; AB Emulsion | ||
| 8 | Blueline Red | Red | ||||||||
| 9 | CP Tex Emulsion | Purple | 0.44 | ✓✓ | ✓✓✓ | ✓ | USA Decoater | One Pot; AB Emulsion | ||
| 10 | DC 521 | Blue | 0.34 | ✓✓✓ | ✓ | ✓✓ | USA Decoater | One Pot; AB Emulsion | ||
| 11 | Plus 7000 | Blue | ✓✓✓ | USA Decoater | AB Emulsion | |||||
| 12 | CPS 500 | Purple | ✓✓✓ | ✓✓ | ✓✓✓ | USA Decoater | AB Emulsion | |||
| 13 | CTR B (DC 565) | |||||||||
| 14 | Chroma Tech SR | Blue | 0.34 | ✓✓✓ | ✓ | ✓ | USA Decoater | AB Emulsion | ||
| 15 | UDC 2 | Aqua | 0.36 | ✓✓✓ | ✓ | ✓✓✓ | ✓✓ | |||
| 16 | Chroma Tech WR | Blue | 0.47 | ✓✓ | ✓✓✓ | ✓✓✓+ | ✓✓✓ | USA Decoater | One Pot; AB Emulsion | |
| 17 | Ulano LX660 USA | |||||||||
| 18 | SM 101 | Blue | ✓ | Caustic Soda, Chlorine | Regular Vinegar; SM 404; One Pot | |||||
| 19 | SM 102 | White | ✓ | Regular Vinegar; SM 404; One Pot | ||||||
| 20 | SM 106 | Blue | ✓✓✓ | ✓ | Regular Vinegar; SM 404; One Pot | |||||
| 21 | SM 124 | ✓ | Oxalic Acid, Potassium Permanganate | Regular Vinegar; SM 404; One Pot | ||||||
| 22 | H 176 | ✓✓✓ | Caustic Soda, Chlorine |
